Termo 120

According to the thickness of the glass and the design scheme, the TERMO 120 system is divided into:

  • Termo 120 is intended for the production of sliding and lifting sliding windows and doors (double glazing) in two-leaf, three-leaf and four-leaf versions.
  • Termo 120 plus is intended for the production of sliding and lifting sliding windows and doors (double glazing) with an integrated fixed part.
  • Termo 120-D is intended for the production of sliding and lifting sliding windows and doors (triple glass) in two-leaf, three-leaf and four-leaf versions.
  • Termo 120-D plus is intended for the production of sliding and lifting sliding windows and doors (triple glass) with an integrated fixed part.

Description

It is a system of profiles with interrupted thermal bridge, basic installation depths of frames from 120 to 196.5 mm. Interruption of the thermal bridge is achieved with polyamide strips of 14.8 mm and 22 mm (Termo 120), 20 mm and 28 mm (Termo 120-D). In order to further improve the thermal characteristics of the profile, profiled XPS rods (extruded polystyrene – ʎ = 0.035 W / m2K) are installed in the profile chambers and such profiles are named in the letter F. Sealing is performed with EPDM seals. The system is compatible with facade systems. Possibility of performing hidden drainage of water from the frame.

Technical characteristics of the system:

  • frame depth: 120 mm (two tracks Termo 120), 184.5 mm (three tracks Termo 120), 115.5 mm (Termo 120 plus), 126 mm (two tracks Termo 120-D), 196.5 mm, 126 mm
  • wing depth: 50.5 mm and 55.7 mm
  • filling depth: up to 44 mm
  • polyamide strips: 14.8 mm and 22 mm, 20 mm and 28 mm
  • wing weight: 330 kg
  • air permeability: EN 12207 (class 4)
  • watertightness: EN 12208 (class E900)
  • wind resistance: EN 12210 (class C4 / B4)
  • noise protection: DIN 4109 (Rw = 33 dB)
  • burglary resistance: EN 1627 (RC2)
  • calculation of Uw coefficient: DIN EN ISO 10077-2 (≥1.4 Wm² / K)
  • base material: EN AW-6060
  • polyamide tape material: PA66 GF25
  • sealing material: EPDM
  • surface treatment: DIN 17611
  • quality control: DIN EN ISO 9001